Fence Cost
Estimate fence materials and cost for fencing projects. Enter length, height, post spacing, picket size, and material prices for instant breakdowns and charts.
Material Prices
About This Calculator
The Fence Cost Calculator helps homeowners, contractors, and DIY enthusiasts estimate the exact materials and total cost needed for a wood picket fence project. Whether you are planning a garden boundary, privacy fence, or property perimeter, this tool calculates the number of posts, rails, pickets, and concrete volume required — then computes the total material cost based on your local prices.
Our calculator uses standard fencing formulas: number of posts and sections are determined from fence length and post spacing; picket count is derived from picket width and gap; concrete volume is calculated for each post footing (30 cm × 30 cm with 76 cm embedment depth). The total cost is the sum of post, rail, picket, and concrete costs. Results update instantly with a material quantity bar chart and a cost breakdown doughnut chart.
Regional Notes
India (IN): Fencing materials are typically priced per piece. Common wood fence posts cost ₹200-500 each, pickets ₹30-80 each, and concrete bags ₹300-500 per 25 kg. Post spacing is often 2.0-2.5 m. Use our calculator with INR prices for accurate local estimates.
United States (US): Typical wood fence posts cost $5-15 each, pressure-treated pickets $2-5 each, and concrete mix $5-8 per 60 lb bag. Standard post spacing is 6-8 feet (1.8-2.4 m). Prices vary by lumber grade and region.
United Kingdom (UK): Fence posts cost £5-15 each, feather-edge boards £1-3 each, and post-mix concrete £4-7 per bag. Standard spacing is 1.8-2.4 m. Always account for VAT and delivery charges on bulk material orders.
Frequently Asked Questions
How do I calculate the cost of a fence?
To calculate fence cost, determine the number of posts, rails, and pickets needed based on fence length and spacing. Multiply each material quantity by its unit price, add concrete for post footings, and sum all costs. Our calculator handles this automatically — just enter your dimensions and material prices.
What is the standard post spacing for a fence?
Standard fence post spacing is 2.0 to 2.5 meters (6 to 8 feet) for most residential wood fences. Closer spacing (1.8 m) provides more strength for tall or privacy fences, while wider spacing (3.0 m) may work for low decorative fences. Always check local building codes for requirements.
How deep should fence posts be buried?
Fence posts should be buried at least one-third of their total length, with a minimum of 60 cm (2 feet) deep. For standard 1.8 m fence height, post length should be about 2.6 m to allow 0.76 m embedment. In frost-prone regions, posts must extend below the frost line, typically 0.9 to 1.2 m deep.
How many pickets do I need per meter of fence?
The number of pickets per meter depends on picket width and gap. For 10 cm wide pickets with 5 cm gap, you need about 7 pickets per meter. For 15 cm pickets with 2 cm gap, you need about 6 pickets per meter. The formula is: number of pickets = ceil(total fence length in cm / (picket width + gap)).
How much concrete do I need per fence post?
A standard fence post footing (30 cm × 30 cm × 76 cm deep) requires approximately 0.068 m³ of concrete per post. For a 40-meter fence with posts every 2 meters (21 posts), you would need about 1.43 m³ of concrete total. A 25 kg bag of concrete mix typically yields about 0.013 m³.
What is the average cost of fencing per meter?
Fencing costs vary widely by material and region. Wood privacy fencing typically costs $15-45 per meter in the US, £20-60 per meter in the UK, and ₹500-2,000 per meter in India. Factors include post spacing, fence height, picket quality, and local labor rates. Use our calculator to get a precise estimate for your project.
How many rails do I need for a fence?
Most fences use 2 to 3 rails per section. A 1.2 m high fence typically needs 2 rails, while fences 1.5 m or taller should have 3 rails for adequate support. The total number of rails equals the number of fence sections multiplied by the rails per section.
What is the difference between fence cost and fence estimate?
A fence cost calculator determines the total material cost including posts, rails, pickets, and concrete based on your specific dimensions and local prices. A fence estimate is a broader approximation that may include labor, permits, and removal of old fencing. Our fence cost calculator focuses on accurate material quantities and costs.